The GGN-150 Sunnen Mandrel Driver is ideal for spindle bushings mounted on axles and other jobs that can’t be taken to a honing machine. Use this mandrel driver with CR-, PL- and ML-Series Hones when you need portability. . Use the GGN-150 Mandrel Driver for holes 3/4″ ID and larger where the length is at least 3 times the […]

4 Stone Mandrel 2.5″ 12″ stroke

P28 5 stone  2.5″+  5 stone mandrel 19″ stroke

New cord, inspected & serviced by electric motor/tool shop, very little use. nearly brand new.   It’s the best thing to use for any seat over 3″ 

Kwik-Way motors with the grinding wheel mount are no longer produced or distributed. We offer “Trade in only”  for these if you need one replaced. We have these rebuilt at a motor shop, requiring re-winding, new bearings, new cords, inner parts and new switches as needed. We have exchange options for Kwik-Way Models FN, FL, […]

Reconditioned boring bar model “FW II” complete with standard tooling, updated with new tool bits and diamond lap sharpen wheel . Completely gone through & tested ready to use. Motor is recon with new bearings, new cord & cast iron dust removed, Sleeve (quill) polished or honed, casting honed to size, all gears examined and […]

K-Line air float unit for small portable boring bars. used “as is”

With Micrometer

Great stand for the smaller cylinders

Great Machine, used with tooling, 10 times the machine than an aamco. Has all tooling. Good for Forklifts, 18 wheelers, as well as all light duty trucks This machine will pay for itself fast.- Located in Chicago

This is one of the best Boring Bar stands Kwik-Way made

Fully Rebuilt FWS II new bearings new drive key, new keyway new belts, gears replaced as needed, Quill polished, new shafts and pulleys as needed, Head cleaned and new tool holder gib installed. Motor rebuilt with new bearings, heavy cord, and rewound when needed.  Comes with standard tool kit ,ready to use. Stand not included. 

Reconditioned boring bar model “FN” complete with standard tooling, updated with new tool bits and diamond lap sharpen wheel (lifetime). Completely gone through & tested ready to use. Motor is recon with new brgs, new cord & cast iron dust removed, Sleeve (quill) polished or ground, casting honed to size, all gears examined and replaces […]

Kwikway no longer makes boring bars, see used categories for  Rebuilt “Boring Machines & Boring Mills ” Most parts are available except some older bars.

This is a refurbished FL bar. including ‘Quill polished, casting honed to size,  new gears as needed, belts, drive key, feed nut, shafts and pulley replaced as needed, all bearings replaced, anchor nuts, new tool bits, diamond lap, Motor rebuilt with new cord. Comes with a complete tool kit. Bores from 3″ to 6 3/4″ […]

DB108 Balancing Machine With USB Interface Series 1 –  $8995.00 . DB208 Balancing Machine With USB Interface Series 2 –  $9995.00 . Install on your knee mill, use your laptop or computer. Works great

The most state of the art & complete Balancer out there. “if it rotates you can balance it”  

Considered the best cap cutter, able to tilt bed and cut sides. 2 sizes available

The most rugged, heavy built (thicker metal) Spray Washers. Using Gusher Pumps. No rubber seals. Priced right, you get a lot of what you pay for. We make 19 sizes and special needs.

. An exclusive, rugged base casting with cast-in table support. This means the table and support are all one piece solid cast material. More durability, more reliability. . Unlimited grinding pressure is possible without table deflection. Again, this means you can work the machine and it will give you the results you need. . There […]

This is the latest model for a kwikway Valve Refacer, 6 ball chuck, accurate within 5 tenths. Optional: high performance chuck within 2 tenths Chuck capacity is 4mm to 9/16″ Gives the finest finish.

The only cap cutter that the motor table tilts with a dial indicator. Can cut the sides of Main caps accurately Optional Bench  $ 395.00

One of the fastest and universal pressure testers out there. On most heads you can load 100 lbs psi With 12 plates it is easy to use. With options you can test blocks, have a accessory cart to make it handy. Optional: Block attachment Set of 12 plates Parts cart